Gap adjustment and installation of two-roll straightener

The straightening machine can effectively straighten metal wires or pipes, bars and other materials during the operation. The straightening machine can effectively extrude the pipes to change the straightness. Generally, the equipment has two Row of straightening rollers, the number varies.

The two-roll straightening machine mainly relies on the angle change of the two rolls and the straightening of materials of different diameters in the process of use. Roll straightening machine, etc.

When the leveler is in operation, it is not allowed to stack its objects on it, which can effectively prevent mechanical vibrations from falling into the body. The material rack or material trough of the equipment should be safe and straight, and the guide cylinder, straightening cylinder and lower cutter should be aligned during installation. Centerline of the hole.

The straightening machine needs to rotate the flywheel of the straightening machine by hand to effectively check the gap adjustment of the transmission mechanism and the working device. After the equipment is confirmed to be normal by tightening the bolts, it is operated in the starting hole, and the bearings should be effectively checked without abnormal noise , the gear meshes well.

When the straightening machine is running, it is necessary to effectively select the appropriate adjustment block and transmission speed according to the diameter of the steel bar. After the equipment has been debugged, the material can be fed. When the equipment is not fixed, the protective cover must not be covered. feed

During the operation of the straightening machine, it is strictly forbidden to call the protective covers and adjust the gap. When the steel bars are fed into the equipment, the hand and the traction wheel need to effectively maintain a certain distance. The material head is cut off, and a 1m long steel pipe should be installed in front of the guide cylinder.