Instructions And Operating Procedures Of The Straightening Machine

In our daily life, its straightening machine is widely used. Such equipment is mainly used to cut its steel bars, especially on construction sites. If there are more steel bars to be processed, it is generally necessary to arrange its professionals. To take care of it, a steady stream of coiled steel bars should be pulled from the right side of the straightening machine into the machine hole.

The straightening machine will effectively straighten its steel bars during the operation, and then put the straightened steel bars on the operating platform of the hoop bending machine, effectively process them into stirrups, and effectively wait for the lifting. The machine will transport them to the real estate of the building, and the straightening of the steel bars and the molding work is a relatively huge task.

If the demand for steel bars is large, it has to make thousands of finished products every day. Under such circumstances, the operation of the straightening machine may be overloaded. Any machine can't stand it. Therefore, during normal operation, the staff should also pay attention to letting the machine rest for a while while taking a rest.

Before the straightening machine is used, it is necessary to conduct a quick straightening inspection to check whether the straightening block is fixed properly, otherwise the straightening block that starts the machine will not injure the operator. In order to deal with the iron filings flying up and polluting the environment in the process of straightening the steel bars, relevant dust-proof measures should be taken.

After the straightening machine understands the diameter of the steel bar to be straightened, the rotation speed of the straightening block and the operation of the traction sheave groove should be suitable for the diameter of the steel bar. diameter