Wide application and structural requirements of straightening machine

Straightening machines are widely used in our daily life. Such equipment is used more especially on construction sites, mainly for cutting steel bars. In the process of working, the straightening machine needs to arrange its special staff to supervise.

If the straightening machine needs to deal with a lot of steel bars, it must have special personnel to arrange the work. During the use process, it is necessary to continuously pull the coiled steel bars from the right side of the straightening machine into the hole of the machine. Inside, straighten the bent rebar.

The straightening machine needs to be placed on the operating table of the hoop bending machine during use, and it is effectively processed into stirrups. When the crane transports them to the real estate of its building, the straightening of the steel bars and the work of molding are relatively A huge task, if the demand for steel bars is large, thousands of finished products must be produced every day.

In the above situation, the operation of the straightener is very likely to be overloaded. In fact, this situation will not occur in general, but if it is turned on for 24 hours, I believe that no matter what the machine is Can't stand it.

The main function of the straightening machine in the process of use is to use straightening and cutting. The application fields of the equipment include non-ferrous metal wire, iron wire, steel wire, etc. A good straightening machine must have the following characteristics, operation It is easy for personnel to operate, stable and reliable in operation, and high in speed.

A high-quality straightening machine should have a reasonable structure and low noise. The straightening speed of the equipment should be fast and the operation efficiency should be high. Generally, the ideal operating speed should reach 60-100 meters per minute; the feeding speed can be adjusted freely.