The performance structure and use requirements of the straightening machine

In our daily life, the straightening machine is widely used, especially on construction sites, mainly for cutting steel bars. Generally, the straightening machine will arrange its special staff to take care of it. The number of steel bars to be processed is relatively large, and special personnel are required to arrange the work.

During the processing of the straightening machine, it is necessary to continuously pull the coiled steel bars from the right side of the equipment into the machine hole, effectively straighten the bent steel bars, and then effectively place the straightened steel bars on the bend. on the operating table of the hoop machine.

The straightening of steel bars and the work of molding are a very huge task. During the operation, if the demand for steel bars is relatively large, thousands of finished products need to be obtained every day. Under such circumstances, the operation of the equipment may be Its overloaded operation will occur.

If the machine needs to be turned on for 24 hours for different operations during the processing, I believe that no matter what kind of machine it is, it will not be able to stand it. Therefore, during the operation, its staff needs to rest, so that the equipment can be buffered. Otherwise, Once there is a failure, it is more than worth the loss.

The motor on the straightening machine effectively increases the speed through its belt drive, so that the straightening cylinder can be rotated at a high speed to a certain extent, the steel bars passing through the straightening cylinder are straightened and the rust on the surface of the steel bars is removed by the straightening die.

The motor in the straightening machine is driven by another pair of deceleration belts and a gear reducer. On the one hand, it drives the two conveying rollers, and the equipment effectively pulls the steel bar forward. On the other hand, it drives the crank wheel to move the hammer head up and down.