News

In our daily life, its straightening machine is widely used. Such equipment is mainly used to cut its steel bars, especially on construction sites. If there are more steel bars ...

In order to effectively obtain the straight sheet and the steel with the correct geometric shape, the rolled piece needs to be straightened on the straightening machine, so the ...

Straightening machine manufacturers provide different straightening solutions for the operation of the straightening machine to meet different working conditions. One is the sma...

There are several different types of straighteners from straightening machine manufacturers based on different metal extrusion flow characteristics, so it is important to determ...

No roll indentation Sixfold performance and features The force distribution of the leveling roller is uniform; Good structural rigidity, small deformation and high leveling accu...

For general leveling needs Quadruple Performance and Features The force distribution of the leveling roller is uniform; Good structural rigidity, small deformation and high leve...

There are internal stress and flatness defects in the sheet, and the causes are: residual stress formed during material manufacturing, mechanical cutting or thermal cutting, tem...

1. According to the diameter of the steel bar of the straightening machine, select the appropriate straightening block, pulling wheel groove and transmission speed. The diameter...

A. If it still does not return after a few movements, it can be removed for repair or replacement. B. Repair can be replaced, C. Press the button of the thermal relay, D. Press ...

A. The total stop button and the host stop button are not functioning properly or damaged, B. The reverse button is not in place or the contact is damaged, C. The thermal relay ...

1. Blocking is a processing technology that cuts a blank or workpiece into two sections (or several sections): it is mainly used for fixed-length blocking of steel bars in house...

1. Standard type Feeding length (width) 0-450mm, feeding thickness 0.1-3.2mm; types of materials that can be sent: metal, paper tape, plastic; shapes of materials that can be se...